The Farm Studios
Mason UK were specified to provide acoustic products and systems for the new Farm Studios on Newman Street in Central London. We worked on the design team, designing and installing the Mason FSN jack up floating floor system and supplying several other acoustic products to isolate the walls and ceilings on this highly specified project.
This project was not the normal run of the road jack up floating floor system. To start with the existing hollow pot construction of the structural slab meant that 10mm thick spreader plates were required at the jack locations. Between the plates, polystyrene void former was laid to keep the concrete thickness to a minimum and reduce the loading on the structural slab. The floating floor slabs were formed with steel angles with rockwool to the inside. The introduction of the angle protected the air gap from the ingress of builders materials.
At the last minute the client requested the installation of rebates with the floating floors to allow for cable runs. The above photo shows a suspended shutter tied in place to the reinforcing steel to provide the rebate for the cable runs.
Mason worked quickly on this project. From start to finish our duration on site was less than 2 weeks, which included the curing time for the concrete prior to the floors being jacked.
After the floors were jacked, Mason supplied a hole host of other acoustic products for the studios, including the NPS partition supports, AB-716 acoustic head restraint angles for the isolated walls and HDQF acoustic hangers for the isolated ceilings. Most of these products were held in stock in our warehouse and supplied shortly after orders were received.
Products Related to Article
HDQF - Rubber Ceiling Hangers
HDQF-A - Acoustic Hanger PDFView Datasheet
HDQF DWGView CAD File
Jack-Up LDS Rubber Floating Floors
Small FSN Floating Floor MountView Datasheet
Large FSN Floating Floor MountView Datasheet
Floating floor brochureView Datasheet